Measurements in Electronics

Meters, volts, amps, S I units

Measurements in Electronics

Many students in their electronics studies have difficulties in understanding the units used in electronics.

Whatever units you are dealing with amps(current), volts (voltage), watts(power) then the unit of measurement is broken down into smaller and larger units.

If you are refering to the electrical measurement of amps, 1 amp is a rather large unit used in power electronics, smaller units are required in electronics.

In electronics the prefix multipliers are in increments or decrements of three orders of magnitude

1 amp
1 milli amp = 0.001 shown in shorthand 10-3
1 micro amp = 0.000 001 shown in shorthand 10-6
1 nano amp = 0.000 000 001 shown in shorthand 10-9

The ohm (symbol: Ω) is the SI unit of electrical impedance

An ohm is a small amount of electrical resistance, most resistors have a larger value given in increments of three orders of magnitude

1 ohm
1 kilo ohm = 1000 shown in shorthand 103
1 meg ohm = 1000 000 shown in shorthand 106

Multi Meter

Meter

The meter settings to allow the meter to read different ranges of current, voltage or resistance are shown opposite.

Notice how how the markings are given in increments of three orders of magnitude

Once this reaches 2/3 rds the supply voltage then the top comparitor will trigger, the discharge transistor will turn on once again discharging the capacitor.

It will remain in this state until the the trigger switch is pressed


Prefixes SI Units