Comparitor 741 Op Amp
Example using temperature sensitive device
Easy explanation
Essential information given in red
A comparitor as the name suggests compares 2 voltages and rapidly changes from either fully saturated (positive) or fully saturated (negative).
Most experiments made using a comparitor use a 741 op amp, this is a very common chip that is used in electronics, whilst not a specialist comparitor chip, the very high gain makes it suitable for this application.
Not part of GCSE electronics syllabus it is useful to know how to wire up such a device, any further studies will definitely require this.
The power supply going to the 741 op amp(comparitor) is provided using a dual volt power supply, both the negative 9 volt and positive 9 volt can be used to provide the supply to the chip.
You could if necessary wire 2 batteries together, wiring the + and - terminals together (see below), the remaining output terminals being used to supply the 741 chip.
Also be aware that the output will be signal will swing between + and - 9 volts unlike a more conventional output of 9 volts and ground.
Temperature controlled comparitor
The circuit below shows a 741 op amp connected to sense the the temperature (using a thermister) in a green house.
When the temperature reaches a certain temperature then the comparitors output will change. An LED will light up but it could also trigger a motor connected to a window to allow the greenhouse to be ventilated.
You will need to understand the layout of a comparitor ciruit and the effects of the voltages on the inverting and non inverting inputs.
When the non-inverting input (V+) is at a higher voltage than the inverting input (V-) The output saturates at the highest positive.
When the non-inverting input (V+) drops below the inverting input (V-) the output saturates at the most negative voltage it can output
Try filling in the following form
You should also be able to label the inverting, non inverting and output of the comparitor Hint - The inverting is marked (-) input A, the non inverting (+) input B, the output marked Vout