Electronics - component items

Identification of components

GCSE Electronics


GCSE Electronics - Electronic components identification

One favored GCSE electronics question seems to the identification of electronic components and the use that they can be put to. Below is a list of the electronic components that have been used. It is also useful to know whether the component is an input, output or processing component

Needed for exam (in red)

THERMISTERS

This is the cct diagram for a thermister

555 timer

A thermister is a temperature sensitive devise

Input sensing device subsystem

Thermisters have a positive or negative temperature coefficients.
Negative temperature coefficient equates to a decrease in resistance when the temperature increases.
Positive temperature coefficient equates to a increase in resistance when the temperature increases.

thermister diagram

thermister graph

LEDS

The LED symbol is shown right/below LEDs are an output subsystem
Can be used connected to the output on digital chips to indicate whether the output is 0 or 1.

LED LED symbol

Variable Resistor

The variable resistor symbol is shown below

Variable resistor Variable resistor
carbon film resister

There is more to variable resistors then just identification of the symbol and uses of the devices required in the exam. Variable resistors can be carbon film composition or wire wound in construction. Wire wound resistors can take a higher wattage than carbon resistors, these are the 2 main construction types that the amateur electronics engineer will encounter.

Variable Resisters

LDR
Light dependamt resistor

When light falls on a LDR the resistance falls, this can be used to trigger a swiching device. The device is an input subsystem

Light dependent Resister
Light dependant resister symbol

Symbol

Lamp symbol

A lamp is a device that emits light when a cuurent is placed through it The device is an output subsystem.

Lamp Image